Development of Nickel-Rich Nickel–Titanium–Hafnium Alloys for Tribological Applications

Autor: Aaron P. Stebner, Christopher DellaCorte, Behnam Amin-Ahmadi, Sean H. Mills, Ronald D. Noebe
Rok vydání: 2020
Předmět:
Zdroj: Shape Memory and Superelasticity. 6:311-322
ISSN: 2199-3858
2199-384X
Popis: Nickel-rich (54–56 at.% Ni) NiTi-based alloys have gained increased attention for their high hardness, corrosion resistance, strength, and wear resistance, leading to their development for high-performance bearings and other wear applications. An investigation of a broader compositional range of NiTiHf alloys, in terms of Ni and Hf content, is presented in this study. Their Vickers micro-hardness, 3 ball-on-rod rolling contact fatigue, and compression performances are benchmarked against early compositions identified for bearing applications, e.g., Ni55Ti45 and Ni54Ti45Hf1. The results show that by varying heat treatments and alloy composition, certain NiTiHf alloys can exhibit long life (~ 107 cycles) at 10–20% greater contact stress levels (up to 2.2–2.4 GPa), together with up to 20% greater hardness (up to 770 HV) and 30% larger compressive yield strengths (up to 3.4 GPa) than the original bearing compositions. These improvements are attributed to the ability to develop alloys with high-volume fractions of fine precipitate phases. Interestingly, a variety of combinations of different precipitate strengthening phases, depending on alloy composition and heat treatment, were able to achieve improvements relative to Ni55Ti45 and Ni54Ti45Hf1, demonstrating the versatility of the NiTiHf system.
Databáze: OpenAIRE
Externí odkaz: