| Popis: |
The insertion torque of a dental implant is an important indicator for the primary stability of dental implants. Thus, the preoperative prediction for the insertion torque is crucial to improve the success rate of implantation surgery. In this present research, an alternative method for prediction of implant torque was proposed. First, the mechanical model for the insertion torque was established based on oblique cutting process. In the proposed mechanical model, three factors, including bone quality, implant geometry and surgical methods were considered by defined bone-quality coefficients, chip load and insertion speeds, respectively. Then, the defined bone-quality coefficients for cancellous bone with the computed tomography (CT) value of 235~245, 345~355 and 415~425 Hu were obtained by a series of insertion experiments of IS and ITI implants. Finally, the insertion experiments of DIO implants were carried out to verify the accuracy of developed model. The predicted insertion torques calculated by the mechanical model were compared with that acquired by insertion experiments, which were agreed match with the relative error less than 15%. This method reduces the time consumption on establishing the fitting equations for different implants and enhance the predicted accuracy by considering the effects of implants’ geometries and surgical methods. |
