Drained deformation characteristics of granular soil under pure principal stress axis rotation: impact of sample preparation
Autor: | Jun Wang, Xuewei Song, Yuanqiang Cai, Qi Sun, Quanyang Dong |
---|---|
Rok vydání: | 2021 |
Předmět: |
Materials science
Strain (chemistry) Deformation (mechanics) 010102 general mathematics 0211 other engineering and technologies 02 engineering and technology Geotechnical Engineering and Engineering Geology Rotation 01 natural sciences Shear modulus Stress (mechanics) Solid mechanics Earth and Planetary Sciences (miscellaneous) Principal stress Sample preparation 0101 mathematics Composite material 021101 geological & geomatics engineering |
Zdroj: | Acta Geotechnica. 16:1755-1772 |
ISSN: | 1861-1133 1861-1125 |
Popis: | The distinct initial fabrics of sand may give rise to dramatically different responses to the applied loading, as evidenced by numerous laboratory tests reported in the literature. In this study, both dry deposition (DD) and moist tamping (MT) methods were employed to prepare sand specimens to generate different initial fabrics. Drained tests were conducted on these specimens under pure principal stress axis rotation while keeping the principal stress components constant. The factors that may influence the deformation characteristics of sand, such as deviatoric stress q, coefficient of intermediate principal stress b, and mean principal stress p, were also taken into consideration in the tests. Test results show that the developments of three normal strain components with number of cycles are very different between DD and MT specimens, which is also closely related to the factors of q, b, and p. It is seen that DD specimen tends to generate larger contractive volumetric strains than MT specimen, which is more significant when q and b increase or p decreases. The shear stiffness of DD specimen is greater than that of MT specimen. The shear modulus ratio, Gj/G1, increases with the increase of q and b or the decrease of p, which is more prominent in DD specimen than in MT specimen. It is also shown that DD specimen appears to exhibit stronger non-coaxiality than MT specimen, in which such difference of non-coaxiality tends to decrease with the increase in number of cycles. |
Databáze: | OpenAIRE |
Externí odkaz: |