Study of the Attenuation Force Generated by a Magnetorheological Fluid in Industrial Robot Grippers Shock Absorbers
| Autor: | Diego Alejandro Jumbo Auquilla, Marco Singaña, Caterine Donoso, Juan Carlos Valencia Salinas |
|---|---|
| Rok vydání: | 2020 |
| Předmět: | |
| Zdroj: | IOP Conference Series: Materials Science and Engineering. 841:012010 |
| ISSN: | 1757-899X 1757-8981 |
| DOI: | 10.1088/1757-899x/841/1/012010 |
| Popis: | The attenuation force generated by the use of magnetorheological fluid (FMR) during the expansion and compression of the shock absorber in robot grippers has been studied. The shock absorber has a stroke of 25 mm and a volume of 4 071.50 mm3 in which the FMR made up of ferric micro-particles and nanoparticles is housed; this fluid modifies its rheological properties when exposed to a magnetic field of variable intensity generated by an electromagnet. The intensity of the magnetic field is gradually varied in order to obtain an attenuated and controlled dynamic force in the dissipation of energy. The research includes an analysis of magnetic field generation with the purpose that the particles of the fluid are aligned according to the polarity of the flow lines, thus forming a fibrillary structure chained in a few milliseconds. This magnetic field modifies the viscosity of the fluid, taking it from a low viscosity to a higher density state without altering its chemical composition and shape. The results are reflected in the direct correlation and in the obtaining of data where the saturation of the fluid is given to a maximum intensity of magnetic flux (B) of 0.01 Tesla; and a damping force of 6, 12 Newtons. This concludes that the theoretical and experimental analysis of attenuation in FMR based buffers serve to mitigate impact excitations, in order to provide a buffered velocity of motion. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|