| Autor: |
Chetan Darshan, Lakhvir Singh, Aps Sethi |
| Rok vydání: |
2012 |
| Předmět: |
|
| Zdroj: |
International Journal of Mechanical and Industrial Engineering. :53-58 |
| ISSN: |
2231-6477 |
| Popis: |
Manufacturers around the globe persistently looking for the cheapest and quality manufactured machined components to compete in the market. Good surface quality is desired for the proper functioning of the produced parts. The surface quality is influenced by cutting speed, feed rate and depth of cut and many other parameters. In the present study attempt has been made to evaluate the performance of ceramic inserts during hard turning of EN-31 steel. The analysis of variance is applied to study the effect of cutting speed, feed rate and depth of cut on Flank wear and surface roughness. Model is found to be statically significant using regression model, while feed and depth of cut are the factor affecting Flank wear and feed is dominating factors for surface roughness. The analysis of variance was used to analyze the input parameters and there interactions during machining. The developed model predicted response factor at 95% confidence level. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
