ABS filament moisture compensation possibilities in the FDM process

Autor:	Adam Hamrol, Radosław Wichniarek, Michał Rogalewicz, Filip Górski, Wiesław Kuczko
Rok vydání:	2021
Předmět:	Protein filament Materials science Moisture Process (computing) Deposition (phase transition) Humidity Composite material Layer thickness Industrial and Manufacturing Engineering Compensation (engineering) Deposition temperature
Zdroj:	CIRP Journal of Manufacturing Science and Technology. 35:550-559
ISSN:	1755-5817
Popis:	The article presents the possibility of compensating for the negative impact of filament humidity on the mechanical properties of parts produced by the FDM method by selecting appropriate process parameters, such as: layer thickness, deposition speed, deposition temperature and chamber temperature. The rules for selecting the process parameters were established on the basis of the results of the experiment, which allowed to identify the main and internal relations between the properties of the product and the process parameters, as well as the humidity of the filament. It was found, that layer thickness is the parameter of the FDM process which compensates for the negative impact of material moisture to the greatest extent.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::e30fa3f6616cb40afa026e0d75616e25 https://doi.org/10.1016/j.cirpj.2021.08.011 Zobrazit plný text záznamu Full Text from ScienceDirect