Finite difference and finite element methods for mhd channel flows
Autor: | Juan I. Ramos, N. S. Winowich |
---|---|
Rok vydání: | 1990 |
Předmět: |
Finite volume method
Applied Mathematics Mechanical Engineering Computational Mechanics Finite difference method Finite difference Reynolds number Geometry Finite difference coefficient Mechanics Finite element method Control volume Computer Science Applications Pipe flow Physics::Fluid Dynamics symbols.namesake Mechanics of Materials symbols Mathematics |
Zdroj: | International Journal for Numerical Methods in Fluids. 11:907-934 |
ISSN: | 1097-0363 0271-2091 |
Popis: | A Galerkin finite element method and two finite difference techniques of the control volume variety have been used to study magnetohydrodynamic channel flows as a function of the Reynolds number, interaction parameter, electrode length and wall conductivity. The finite element and finite difference formulations use unequally spaced grids to accurately resolve the flow field near the channel wall and electrode edges where steep flow gradients are expected. It is shown that the axial velocity profiles are distorted into M-shapes by the applied electromagnetic field and that the distortion increases as the Reynolds number, interaction parameter and electrode length are increased. It is also shown that the finite element method predicts larger electromagnetic pinch effects at the electrode entrance and exit and larger pressure rises along the electrodes than the primitive-variable and streamfunction–vorticity finite difference formulations. However, the primitive-variable formulation predicts steeper axial velocity gradients at the channel walls and lower axial velocities at the channel centreline than the streamfunction–vorticity finite difference and the finite element methods. The differences between the results of the finite difference and finite element methods are attributed to the different grids used in the calculations and to the methods used to evaluate the pressure field. In particular, the computation of the velocity field from the streamfunction–vorticity formulation introduces computational noise, which is somewhat smoothed out when the pressure field is calculated by integrating the Navier–Stokes equations. It is also shown that the wall electric potential increases as the wall conductivity increases and that, at sufficiently high interaction parameters, recirculation zones may be created at the channel centreline, whereas the flow near the wall may show jet-like characteristics. |
Databáze: | OpenAIRE |
Externí odkaz: |