Effect of reduction of slider pitch-mode vibration on magnetic-recording performance at low-clearance head–disk interface
Autor: | Jianhua Li, Junguo Xu, Yuki Shimizu, Hidekazu Kohira, Kiyoshi Hashimoto |
---|---|
Rok vydání: | 2012 |
Předmět: | |
Zdroj: | Microsystem Technologies. 18:1597-1606 |
ISSN: | 1432-1858 0946-7076 |
DOI: | 10.1007/s00542-012-1597-7 |
Popis: | Aiming at improvements of both stability of slider flying and magnetic-recording performance under a low-clearance condition, a “narrow-grooved slider” was constructed and demonstrated at drive level. The proposed slider has narrow grooves on its center pad of an air-bearing surface for attaining a high-damping effect on pitch-mode resonant vibration of the air bearing. The relationship between the high-damping effect and the pitch-mode resonant vibration was studied, and the magnetic-recording performance at the lube/slider interaction regime was improved. In this study, first, flying-height modulation (FHM) of the slider was analyzed in the frequency domain by using a fast Fourier transform. Compared with the narrow-grooved slider, a non-grooved slider showed a larger increase in high-frequency modulation of gap flying height when the clearance was reduced to near “zero” at which the slider is starting to interact with lube. Furthermore, by means of drive-level experiments, sector error rate (SER) as a function of flying clearance was investigated. Under a low gap flying height condition, HDDs with the non-grooved slider showed slight SER degradation during slider/lube interaction. However, the narrow-grooved slider did not show any SER degradation at the same gap flying height; the damping effect of the narrow-grooved slider suppressed high-frequency FHM, thereby preventing SER degradation in the slider/lube interaction region. |
Databáze: | OpenAIRE |
Externí odkaz: |