Modelling and experimental development of the direct thermal method of rheocasting

Autor:	N. Lumsden, M. J. Hussey, David J. Browne, A. J. Carr, Michelle Scanlan
Rok vydání:	2007
Předmět:	Materials science Mechanical Engineering Metallurgy Alloy Metals and Alloys engineering.material Isothermal process Superheating Mechanics of Materials Casting (metalworking) visual_art Phase (matter) Heat transfer Aluminium alloy visual_art.visual_art_medium engineering Foundry
Zdroj:	International Journal of Cast Metals Research. 20:325-332
ISSN:	1743-1336 1364-0461
DOI:	10.1179/136404608x286147
Popis:	Rheocasting processes produce a globular (non-dendritic) morphology in the primary phase of a metallic alloy. The authors have developed the direct thermal method (DTM) of obtaining this morphology, using only standard foundry equipment. In the DTM the alloy is poured, at low superheat, into a cylindrical thin walled metallic mould, and by careful selection of mould materials and geometry, a near isothermal situation occurs for sufficient time to render the primary phase globular. No active thermal management is required or used. The sensitivity of DTM rheocasting of aluminium alloy to variables such as mould inner and outer diameter, mould material, heat transfer at the system interfaces, and starting temperatures, is assessed in this paper. This is done through both experiment and computer modelling. It is concluded that steel is a superior mould material than copper for the DTM, both for operational reasons and to enable the casting of larger diameter billets.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::dcd544773eef4e504e5c3cabea3ad526 https://doi.org/10.1179/136404608x286147 Zobrazit plný text záznamu Plný text ve formátu PDF