Potential leaching of mercury from stable mercury sulphide

Autor: M. Devasena, Indumathi M. Nambi
Rok vydání: 2021
Předmět:
Zdroj: International Journal of Environmental Science and Technology. 18:3677-3684
ISSN: 1735-2630
1735-1472
DOI: 10.1007/s13762-020-03064-6
Popis: The study aims to stabilize elemental mercury to mercury sulphide and investigate the effect of various groundwater interferences like chloride, nitrate, sulphate and bicarbonate on the dissolution of mercury from mercury sulphide and elemental mercury. Elemental mercury was stabilized using sodium polysulphide solution in a one-step batch experiment in a period of 96 h. Mercury sulphide was formed as a black fine powder with average particle size of 10–500 nm. Mercury sulphide was tested under different pH conditions and under different concentrations of Cl−, NO3−, SO42−, and HCO3− for dissolution of mercury. At pH ≤ 4 and pH ≥ 12, dissolved mercury concentrations from mercury sulphide were 70.47 μg/L and 41.81 μg/L, respectively. At pH 10, mercury dissolution was the lowest with dissolved mercury as 8 μg/L proving that mild alkaline pH is necessary for stability of mercury. At low concentration of the anions, interfering effects were in the order of NO3− > Cl− > SO42− > HCO3−, whereas under high concentrations, the order was Cl− > NO3− > SO42− > HCO3−. Unlike NO3− and Cl−, SO42− and HCO3− ions were reported to cause potential leaching only if they are present in significantly high concentrations. Nevertheless, mercury sulphide was found to be the preferred chemical state for permanent storage of mercury in the subsurface when compared to elemental mercury.
Databáze: OpenAIRE
Externí odkaz: