Purification of reagents and separation of element traces by electrodeposition onto a graphite tube cathode

Autor: Rainer P. H. Garten, Günther Tölg, K. Hoppstock, P. Tschöpel
Rok vydání: 1992
Předmět:
Zdroj: Fresenius' Journal of Analytical Chemistry. 343:778-781
ISSN: 1618-2650
0937-0633
DOI: 10.1007/bf00633566
Popis: The use of a commercially available AAS graphite tube atomizer as an electrode for the cathodic electrodeposition of element traces at constant-current in a hydrodynamic flow-through-system is described. After deposition the graphite tube is transferred into an atomizer unit for subsequent sensitive determination by atomic absorption spectrometry. The deposition yield of ≥99% (2 h; 1.5 A) for Co was verified, using60Co as a radioactive tracer, by monitoring the concentration fall in the electrolyte solution down to ≤5 pg/ml, and the deposited material. The efficiency of the system for the purification of electrolyte solutions was found to be very high. For the determination of the residual impurities, e.g. in very concentrated NH4F-solutions, a simple ion-exchange procedure was worked out for Cu, Mn, Ni, Pb, Zn. To get back the high purity solid NH4F, the solvent was evaporated partly and the precipitated crystals were sucked off in a PTFE-funnel. To avoid contamination, crystallization was carried out in a closed container system using the principle of subboiling distillation. The purity of the recrystallized NH4F-salt increased by a factor of 2 to 3 (crystallization yield 50–70%) so that a solid product with an impurity level below 0.5 ng/g was obtained.
Databáze: OpenAIRE
Externí odkaz: