Characterization of Pyroclastic Deposit from Three Different Areas within Foumbot Region (West-Cameroon): Comparative Studies of Their Effects as Pozzolanic Materials in Mortars and Cement Manufacture

Autor: Benjamin Ntieche, Amidou Moundi, Mahomed Aziz Mounjouohou, Daouda Dawai, Frederic Michel
Rok vydání: 2019
Předmět:
Zdroj: Journal of Geoscience and Environment Protection. :195-209
ISSN: 2327-4344
2327-4336
DOI: 10.4236/gep.2019.711014
Popis: Pyroclastics which are known natural pozzolanic materials due to amorphous contents, are present in several areas of the Mbepit Massif in West Cameroon. In this work natural pozzolan from three zones namely Pouoloum, Njimbouot and Nkouonja were characterized. A comparative study was then developed to attest the effect of these pyroclastics as partial substitution in portland cement. The mixtures were made at different pozzolanic proportions (00%, 10%, 15%, 25% and 35%) of substitution of the cement. The compressive and flexibility strength was carried out at 7, 28 and 90 days on mortar specimens (4 × 4 × 16 cm3). The results revealed apozzolanicactivity index of 81.99 %, 83.47% and 74.54% respectively for rock sample from Pouoloum (PCB), sample from Njimbouot (PCC) and sample from Nkouonja (PCN). After 90 days, for a substitution rate of 25% compressive strength are respectively 55.69 MPa, 60.4 MPa, 53.34 MPa for PCB, PCC and PCN. According to the American Society for Testing and Materials (ASTM) C618 classification, the pyroclastics are in accordance with all the criteria to be classified as pozzolan. Independent of the substitution rate, the mechanical performance increases with age in PCB, PCC and PCN. However PCC is most reactive than PCB and PCN. This may be due to the amorphous reactive content in this material and can be linked to the eruptive dynamisms which were more explosive in some areas than in others. The amorphous content is 32.01%, 36.99%, 24.84% for PCB, PCC and PCN respectively. These results also prove that Natural Pozzolan is interesting in the manufacture of composite cement CEM II, CEM IV in accordance with EN197-1 or can be added in mortar for buildings and sustainable environmental management.
Databáze: OpenAIRE
Externí odkaz: