| Popis: |
High-temperature acidizing operations are challenging because of the highly corrosive nature of acids. Hydrochloric (HCl) acid has an especially high reaction rate, which increases the rate of tubular corrosion. In addition to the type and concentration of acids, factors such as temperature and metallurgy influence the rate of corrosion. To meet increasing demand for deeper stimulation at high temperatures, emulsified acid is predominately used. It contains acid in the internal phase and oil in the external phase, forming an invert emulsion. The outer oil phase creates a barrier for acid, allowing its slow release for reaction with reservoir rock. Emulsified acid systems provide several advantages compared to plain acid. The oil barrier especially helps with preventing corrosion by significantly reducing the contact of acid with the metal tubular. High fluid viscosity helps reduce fluid loss, distributes the acid more uniformly in the formation, and reduces the rate of corrosion. Selection of the proper corrosion inhibitor(s) is one of the most important criteria for high-temperature acidizing. The use of intensifier(s) with the inhibitor enhances the corrosion inhibition significantly. This makes it possible to use a higher concentration of HCl acid at temperatures as high as 350°F, thus enhancing the fluid efficiency. In this work, several corrosion inhibitors and intensifiers are studied at varied acid strengths and temperature conditions. To achieve good corrosion control, a synergy is required between corrosion inhibitors and corrosion inhibitor intensifiers. At the same time, they should not negatively impact the emulsion stability. A new emulsified acid system was developed using HCl acid strength up to 28%. High corrosion control imparted by inhibitor-intensifier synergy coupled with the slow reaction rate of emulsified acid makes this blend unsurpassed for use in extreme high-temperature conditions up to 350°F. This emulsified acid system has the potential for use in the Khuff formation of Saudi Arabia with the addition of a H2S scavenger. Testing with a commercially available scavenger exhibited good compatibility with the blend. |
