Dynamic behavior of CHS-SHS tubular T-joints subjected to low-velocity impact loading
| Autor: | Xingquan Guan, Fei Gao, Xiao Zigang, Hongping Zhu, Guofeng Du |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Chord (geometry)
Materials science business.industry 0211 other engineering and technologies 020101 civil engineering 02 engineering and technology Structural engineering Deformation (meteorology) humanities Brace 0201 civil engineering law.invention Buckling law 021105 building & construction Displacement (orthopedic surgery) Hammer Impact business Joint (geology) Civil and Structural Engineering |
| Zdroj: | Engineering Structures. 183:720-740 |
| ISSN: | 0141-0296 |
| DOI: | 10.1016/j.engstruct.2019.01.027 |
| Popis: | Welded steel tubular structures are easily exposed to impact loading which may cause devastated damage firstly to their connecting joints. The critical joints determine the dynamic mechanical performance of the structures in those unexpected catastrophes. This paper describes an experimental and numerical impact investigation on dynamic behavior of CHS-SHS tubular T-joints, made up of a circular hollow section (CHS) brace and a square hollow section (SHS) chord. Seven CHS-SHS tubular T-joint specimens with different geometric and loading properties were tested on an in-house dropped hammer testing machine. The deformation mode of the joint specimens was identified as outward buckling of the chord side walls and indentation of the chord top surface. The experimental results indicated that increasing the geometric parameter β (the width ratio of the brace to chord) enhanced the impact resistance, increasing the impact velocity significantly affected the dynamic response, and changing the boundary condition had little effect on the dynamic performance of the joints. Six finite element (FE) models of the tested joint specimens were developed to simulate the dynamic behavior of the joints. The comparison of the impact force, displacement development, and deformation mode showed that the FE analysis was in good agreement with the experimental results. A parametric study was subsequently conducted to quantify the effects of the impact velocity, impact mass, and impact energy on the dynamic performance of the joints. The numerical results showed that the impact force, displacement, and energy dissipation were linearly dependent on the impact energy of the dropped hammer, and the impact duration of the impact process was directly correlated to the impact momentum. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect