| Autor: |
Han-Ping Dong, Li Yu, Deng-Fei Yu, Wenjie Xia |
| Rok vydání: |
2011 |
| Předmět: |
|
| Zdroj: |
Colloids and Surfaces A: Physicochemical and Engineering Aspects. 392:124-130 |
| ISSN: |
0927-7757 |
| DOI: |
10.1016/j.colsurfa.2011.09.044 |
| Popis: |
Biosurfactant produced by Pseudomonas aeruginosa , Bacillus subtilis and Rhodococcus erythropolis that isolated from the formation water of Chinese petroleum reservoir has been compared in surface abilities and oil recovery. Maximum biosurfactant production reached to about 2.66 g/l and the surface tension of liquid decreased from 71.2 to 22.56 mN/m using P. aeruginosa . Three strains exhibited a good ability to emulsify the crude oil, and biosurfactant of P. aeruginosa attained an emulsion index of 80% for crude oil which was greater than other strains. Stability studies were carried out under the extreme environmental conditions, such as high temperature, pH, salinity and metal ions. Results showed an excellent resistance of all biosurfactants to retain their surface-active properties at extreme conditions. It was found that the biosurfactants from three isolated bacteria showed a good stability above pH of 5, but at lower pH (from 1 to 5) they will harmfully be affected. They were able to support the condition up to 20 g/l salinity. P. aeruginosa biosurfactant was even stable at the higher salinity. Regarding temperature, all produced biosurfactants demonstrated a good stability in the temperature up to 120 °C. But stability of three biosurfactants was affected by monovalent and trivalent ions. Oil recovery experiments in physical simulation showed 7.2–14.3% recovery of residual oil after water flooding when the biosurfactant of three strains was added. These results suggest that biosurfactants of these indigenous isolated strains are appropriate candidates for enhanced oil recovery with a preference to biosurfactant of P. aeruginosa . |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect