Mechanical failure of fresh nuclear grade iron–chromium–aluminum (FeCrAl) cladding under simulated hot zero power reactivity initiated accident conditions
| Autor: | Kory Linton, Nicholas R. Brown, M. Nedim Cinbiz, Richard R. Lowden, Benton E. Garrison |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
Nuclear and High Energy Physics
Digital image correlation Zirconium Materials science chemistry.chemical_element 02 engineering and technology Strain rate 021001 nanoscience & nanotechnology Cladding (fiber optics) 01 natural sciences Thermal expansion 010305 fluids & plasmas Nuclear Energy and Engineering chemistry Aluminium 0103 physical sciences General Materials Science Neutron Deformation (engineering) Composite material 0210 nano-technology |
| Zdroj: | Journal of Nuclear Materials. 539:152352 |
| ISSN: | 0022-3115 |
| DOI: | 10.1016/j.jnucmat.2020.152352 |
| Popis: | The reactivity initiated accident (RIA) is a postulated accident in light water reactors initiated by a rapid increase in reactivity which causes an increase in fission rate and fuel temperature. One potential mode of fuel system failure during RIA is pellet cladding mechanical interaction (PCMI) due to the rapid thermal expansion of the fuel pellet. Simulated PCMI experiments were performed by rapidly pressurizing iron-chromium-aluminum (FeCrAl) cladding tube samples using a hydraulic modified burst test system, causing the specimens to burst under a biaxial loading path. Deformation and rupture of the specimens were tracked with a telecentric lens and high-speed camera system. Outer surface strains were calculated using digital image correlation (DIC) on speckle patterns painted on the specimens’ outer surfaces. Experiments were conducted at approximately 275 °C, representative of hot zero power RIA conditions. The failure hoop strain was DIC-calculated between approximately 1.8–3.4%, corresponding to quasi-static energy depositions of approximately 110–260 calories per gram UO2 assuming initial pellet-cladding contact. These conditions are very similar to the proposed energy deposition limit of 150 calories per gram UO2 for unirradiated zirconium-based cladding in US Nuclear Regulatory Commission (NRC) Draft Regulatory Guide 1327. A very small strain rate dependence was observed in the data, with the magnitude of the failure hoop strain decreasing slightly with increasing strain rate. This observed dependence may be relevant because the FeCrAl cladding strain rate will be approximately 20% higher than in zirconium-based cladding due to the harder neutron spectrum and resultant shorter neutron generation time. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect