Dilute solution properties of poly(d,l-lactide) by static light scattering, SAXS, and intrinsic viscosity

Autor: Moriya Kikuchi, Hiroki Kosugi, Takahiro Watanabe, Kayo Ueda, Yoshinori Suzuki, Atsushi Narumi, Seigou Kawaguchi
Rok vydání: 2019
Předmět:
Zdroj: Polymer Journal. 52:387-396
ISSN: 1349-0540
0032-3896
DOI: 10.1038/s41428-019-0293-1
Popis: The dilute solution properties of poly(d,l-lactide)s (PDL50) with a weight-averaged molar mass (Mw) ranging from 0.154 × 104 to 75.7 × 104 g mol−1 are thoroughly studied in tetrahydrofuran at 25 °C by static light and small-angle X-ray scattering and intrinsic viscosity ([η]) measurements. Fourteen PDL50 samples with a narrow molar mass distribution are synthesized at 150 °C by ring-opening copolymerization of a 1:1 mixture of d-lactide and l-lactide with benzyl alcohol as an initiator and tin(II) dichloride dihydrate as the catalyst, followed by fractionation using recycling preparative size exclusion chromatography. The Mw dependences of the z-averaged root-mean-square radius of gyration (〈S2〉z1/2) and [η] are rationalized and analyzed based on the cylindrical wormlike chain model. The experimental Mw dependence of 〈S2〉z1/2 is quantitatively described by the wormlike cylinder with stiffness parameter λ−1 = 2.9 nm, molar mass per unit contour length ML = 270 ± 20 g mol−1 nm−1, protruding effects at both ends δ = 0.4 nm, and excluded-volume strength B = 0.31 ± 0.07 nm. The experimental Mw dependence of [η] and the scattering form factor P(q) are also consistently expressed by the current theories with the same model parameters. The results indicate that the PDL50 chain behaves as a typical flexible polymer but is essentially 1.6−2.1 times stiffer than the representative vinyl polymers, polystyrene (λ−1 = 1.8 nm) and poly(methyl methacrylate) (λ−1 = 1.4 nm), most likely due to the planar feature of the ester linkage, which partially constrains the free rotation of the main chain. The dilute solution properties of poly(d,l-lactide)s (PDL50) with a weight-averaged molar mass (Mw) ranging from 0.154 × 104 to 75.7 × 104 g mol−1 are thoroughly studied in tetrahydrofuran at 25 °C by static light and small-angle X-ray scattering and intrinsic viscosity ([η]) measurements. The Mw dependences of 〈S2〉z1/2 and [η] are quantitatively described by the wormlike cylinder with stiffness parameter λ−1 = 2.9 nm, indicating that the PDL50 chain behaves as a typical flexible polymer but is essentially 1.6−2.1 times stiffer than polystyrene and poly(methyl methacrylate).
Databáze: OpenAIRE
Externí odkaz: