X‐ray gauge measures areal density variations as small as 0.1%
Autor: | David M. Stupin |
---|---|
Rok vydání: | 1985 |
Předmět: | |
Zdroj: | Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. 3:1266-1268 |
ISSN: | 1520-8559 0734-2101 |
DOI: | 10.1116/1.573080 |
Popis: | A gauge measures areal density variations as small as 0.1% in low density plastic foams and other materials. It has a spatial resolution of 0.5 mm. This system is safe, portable, easy to use, and is readily automated. The 6 keV x-ray flux from a /sup 55/Fe source is collimated to a 0.5 mm diameter beam and attenuated by the sample. Transmitted x-rays are detected with a proportional gas detector and counted with a scaler-timer. After measuring the x-ray attenuation in two areas of the sample, the areal density variation is calculated using an |
Databáze: | OpenAIRE |
Externí odkaz: |