Hydrogen production from biomass gasification in the oil refining industry – A system analysis
| Autor: | Thore Berntsson, Daniella Johansson, Per-Åke Franck |
|---|---|
| Rok vydání: | 2012 |
| Předmět: |
Engineering
Waste management Wood gas generator business.industry Mechanical Engineering Fossil fuel Oil refinery Environmental engineering Biomass Building and Construction Pollution Industrial and Manufacturing Engineering Refinery Steam reforming General Energy Biofuel Electrical and Electronic Engineering business Civil and Structural Engineering Hydrogen production |
| Zdroj: | Energy. 38:212-227 |
| ISSN: | 0360-5442 |
| DOI: | 10.1016/j.energy.2011.12.011 |
| Popis: | In this paper, the global CO2 effect of integrating different biomass gasification concepts to meet an increasing demand of hydrogen in an oil refinery is examined and presented in comparison with a conventional steam reformer. The studied refinery is a hydro skimming refinery with a future hydrogen deficit of 16,000 Nm3/h. Three gasification concepts are considered: Entrained Flow (EF), Circulated Fluidised Bed (CFB) and Double Bed (DB). The system analysis is made with respect to global CO2 emissions and primary energy use. The results show that if biomass is considered as an unlimited resource (i.e. sufficient biomass is considered to be available to substitute for all fossil fuels in society), biomass gasification concepts have a potential to reduce CO2 emissions. The EF case shows the largest reduction potential. However, if biomass is considered as a limited resource (i.e. increased use of biomass at the refinery will lead to increased use of fossil fuel elsewhere in society), all concepts show an increase of CO2 emissions. Here, the CFB gasifier shows lowest increase of CO2 emission. The CO2 effect of the different alternatives shows sensitivity to assumptions regarding alternative biomass user. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect