Effect of the surface of the rough pipe on the fluid flow rate
| Autor: | Irfan Hilmi, Dan Mugisidi, Oktarina Heriyani |
|---|---|
| Rok vydání: | 2020 |
| Předmět: | |
| Zdroj: | IOP Conference Series: Materials Science and Engineering. 909:012015 |
| ISSN: | 1757-899X 1757-8981 |
| DOI: | 10.1088/1757-899x/909/1/012015 |
| Popis: | The concept of controlling the flow over the circular cylinder to reduce drag force and vibration caused by vortex flow has been explored by many researchers. One of them is by adding plates and helical strakes. However, the splitter plate is only useful for determining the direction of the current, while helical strakes increase drag force compared to cylinder forces of the same diameter. The problem that arises is that the surface roughness of the pipe will affect the characteristics of the fluid flow through it, so this study aims to analyze the characteristics and effects of fluid flow through the rough surface of the outer wall of the pipe by visualizing using Particle Image Velocity (PIV). The variation of pipe roughness used in this study is the roughness of sandpaper 100 and sandpaper 400 that encloses the pipe. The results showed that the addition of surface roughness resulted in the addition of the distance of the formation of vortex where the distance of 0.07 m was the longest distance from the bottom vortex formation on the pipe wrapped in sandpaper 100. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|