Piezoelectric quartz sensor for caffeine based on molecularly imprinted polymethacrylic acid
| Autor: | Benilda S. Ebarvia, Fortunato Sevilla |
|---|---|
| Rok vydání: | 2005 |
| Předmět: |
chemistry.chemical_classification
Detection limit Poly(methacrylic acid) Materials science Scanning electron microscope Piezoelectric sensor Metals and Alloys Analytical chemistry Molecularly imprinted polymer Polymer Condensed Matter Physics Surfaces Coatings and Films Electronic Optical and Magnetic Materials Crystal chemistry.chemical_compound X-ray photoelectron spectroscopy chemistry Materials Chemistry Electrical and Electronic Engineering Instrumentation |
| Zdroj: | Sensors and Actuators B: Chemical. 107:782-790 |
| ISSN: | 0925-4005 |
| DOI: | 10.1016/j.snb.2004.12.018 |
| Popis: | The feasibility of a piezoelectric quartz caffeine sensor based on a molecularly imprinted poly methacrylic acid is described. The caffeine sensor was devised by depositing the polymer onto one side of an AT-cut quartz crystal through an electropolymerization process The sensor response exhibited a linear relationship between frequency shift and the logarithm of the caffeine concentration in the range of 1 × 10−9 up to 1 mg/mL. The sensor showed a sensitivity of about 53 Hz/ln (conc., mg/mL) and a limit of detection of 5.9 × 10−11 mg/mL. The performance of the sensor was affected by parameters such as the nature of the immobilizing agents, the polymer load, the thickness of the coating and the pH. Surface analysis techniques such as scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) were performed on the sensor surface to establish the imprinting of the caffeine molecule. The SEM micrographs, AFM image and XPS spectra provided evidences for the imprinting process and the recognition of caffeine by the MIP during the sensing process. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect