Effect of Annealing on the Mechanical and Thermomechanical Characteristics of a Ti50Pd40Ni10 Alloy with High-Temperature Shape Memory Effect Studied on a Strip

Autor: D. V. Presnyakov, V. F. Lar’kin, E. N. Grishin, A. A. Kostyleva, N. N. Popov
Rok vydání: 2021
Předmět:
Zdroj: Russian Metallurgy (Metally). 2021:830-841
ISSN: 1555-6255
0036-0295
DOI: 10.1134/s0036029521070089
Popis: The properties of a Ti50Pd40Ni10 alloy (at %) with a high-temperature shape memory effect (SME) are studied on samples manufactured from a 2.04-mm-thick strip after various annealing and strain-creation conditions. Data on the elemental and local phase compositions, the grain sizes and the microhardness, the phase transformation temperatures, and the mechanical and thermomechanical characteristics have been obtained. The best average shape memory characteristics (eSME = 4.3%, ηSME = 0.57) are found to be obtained for the alloy samples subjected to vacuum annealing (600°C, 1 h) on heating to 500°C (stable end of SME) after the tensile strain preliminarily induced at a temperature of 380–370°C (after heating to 450°C) at a rate $$\dot {\varepsilon }$$ ≈ 3.1 × 10–3 s–1 and the same degree of total induced strain et = 11%. In this case, the average temperatures of the start and finish of the main shape recovery are As SME = 418°C and Af SME = 435°C, respectively. These thermomechanical characteristics are acceptable for an alloy chosen for creation of safety devices, e.g., of a cutting type, in which thermosensitive elements have a tray shape.
Databáze: OpenAIRE
Externí odkaz: