Carbon Nanoporous Adsorbents Prepared from Walnut Shell for Liquefied Natural Gas Vapor Recovery in Cryogenic Storage Systems
Autor: | S. S. Chugaev, Yu. A. Romanov, M. R. Kiselev, I. E. Men’shchikov, A. V. Shkolin, A. A. Fomkin, A. L. Pulin |
---|---|
Rok vydání: | 2020 |
Předmět: |
Materials science
Capillary condensation Nanoporous Carbonization 020209 energy Organic Chemistry Metals and Alloys chemistry.chemical_element 02 engineering and technology Microporous material 021001 nanoscience & nanotechnology Methane Surfaces Coatings and Films chemistry.chemical_compound Adsorption chemistry Volume (thermodynamics) Chemical engineering 0202 electrical engineering electronic engineering information engineering Materials Chemistry 0210 nano-technology Carbon |
Zdroj: | Protection of Metals and Physical Chemistry of Surfaces. 56:1122-1133 |
ISSN: | 2070-206X 2070-2051 |
DOI: | 10.1134/s2070205120050202 |
Popis: | A one-step notion of synthesis was developed to prepare microporous activated carbons from walnut shell by physical gas activation in a CO2 atmosphere for a low-temperature methane accumulation system operating at 120, 160, and 178 K. The raw material was carbonized within a temperature range from 240 to 950°C. Temperatures close to 900°С were found to be optimal for the development of microporosity in the adsorbent in a CO2 atmosphere. Activation under these conditions made it possible to achieve a burnoff degree up to 70% and form an optimal porous structure for adsorption accumulation of liquefied natural gas (LNG) vapors. The adsorbent thus obtained exhibits a high micropore volume W0 = 0.59 cm3/g, mesopore volume WМЕ = 0.33 cm3/g, specific surface SBET = 1490 m2/g, and half-width of micropores of 0.59 nm, which provided a high methane adsorption capacity. The presence of mesopores can make additional contribution to the adsorption process due to capillary condensation. The theoretical assessment of the methane adsorption capacity of the adsorbent showed that at temperatures of 120, 160, and 178 K and pressures up to 6 bars, the values of equilibrium adsorption were 15, 13.5, and 12 mmol/g, respectively. |
Databáze: | OpenAIRE |
Externí odkaz: |