| Autor: |
Abadal-Salam T. Hussain, Muhammad Irwanto Misrun, Gomesh Nair Shasidharan, Taha A. Taha, Waleed A. Oraibi, Fadhel A. Jumaa, Mohd Irwan Yusoff, F. Malek, Syed Faiz Ahmed, Jailani O. Mahmoud, Nur Fairuz Mohamed Yusof |
| Rok vydání: |
2015 |
| Předmět: |
|
| Zdroj: |
Applied Mechanics and Materials. 793:65-69 |
| ISSN: |
1662-7482 |
| Popis: |
Electrical Power System protection is required to protectboth the user and the system equipment itself fromany fault, hence electrical power system is not allowed to operate without any protection devices installed. Power System fault is defined as the undesirable condition that occurs in the power system. Some of these undesirable conditions are short circuit, current leakage, ground faultand over-under voltage. With the increasing loads, voltages and short-circuit duty in power plant, over voltage protection has become more important today. Here, the component that had been used is PIC 16F877a microcontroller to control the whole system and especially on the circuit breakers as well as the LCT display unit is used to display the voltage level and type of generator that used to serve the load. Sensors are used to measure both thevoltage and the load. The controlled digital signal from PIC microcontroller is converted by using the digital analog converter to control the whole circuit. Thus a device called protective relay is created to meet this requirement. The protective relay is mostlyoften coupled with circuit breaker in a way that it can isolate the abnormal condition in the system. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
