Monotonic crack propagation in a notched polymer matrix composite reinforced with continuous fiber and printed by material extrusion

Autor: Jorge Guillermo Díaz-Rodríguez, Alberto David Pertúz-Comas, Caleb Josué Ariza González, Daniel David Garcia López, William Pinto Hernández
Rok vydání: 2023
Předmět:
Zdroj: Progress in Additive Manufacturing.
ISSN: 2363-9520
2363-9512
DOI: 10.1007/s40964-023-00423-w
Popis: The study presents the crack mouth opening and propagation of cracks in a composite material printed by material extrusion subjected to monotonic loading. The composite material is made out of a nylon matrix (with embedded short carbon fiber—called Onyx®) and reinforced with continuous Kevlar fibers. Three-point bending tests were performed on notched specimens built according to ASTM-E399. Tests were digitally recorded to extract crack opening displacement (COD) and crack length data through image treatment techniques (using ImageJ), and results were analyzed using linear elastic fracture mechanics parameters through the use of COD. Therefore, the crack mouth opening was established, and fracture toughness was found to be 46 MPa√m. Additionally, microscopy analysis identified fracture zones, crack initiation, transition, and final rupture. The observed failure mechanisms were matrix cracking, fiber pull-out, fiber breakage, and defects such as non-proper fiber-matrix bonding.
Databáze: OpenAIRE
Externí odkaz: