Synergistic effect of micro-textures and MoS2 on the tribological properties of PTFE film against GCr15 bearing steel
Autor: | Peiyun Zhang, Peng Rui, Bifeng Yin, Jianhua Li, Zhixiang Tian, Cao Xiaobin, Xuan Xie, Xijun Hua |
---|---|
Rok vydání: | 2021 |
Předmět: |
0209 industrial biotechnology
Materials science Bearing (mechanical) Mechanical Engineering Composite number 02 engineering and technology Tribology Seal (mechanical) law.invention Reciprocating motion 020303 mechanical engineering & transports 020901 industrial engineering & automation Contact surfaces 0203 mechanical engineering Mechanics of Materials law Lubrication Composite material Dry lubricant |
Zdroj: | Journal of Mechanical Science and Technology. 35:2151-2160 |
ISSN: | 1976-3824 1738-494X |
Popis: | To enhance the friction and wear resistance of GCr15/PTFE sliding contact surfaces, the synergistic lubrication effect of micro-textures and solid lubricants were studied in this paper. Micro-textures were processed on GCr15 samples by Nd:YAG laser, which were filled with MoS2. Tribological performance tests were carried out on a Rtec-MFT 5000 tester. Tribological properties were optimal with the textures density of 20% and depth of 9 µm. A continuous composite solid lubricating film was formed by PTFE and MoS2. As load increases, friction coefficient of the sample shows a rapid decline and then stabilizes. With the increase of reciprocating frequency, friction curve of the sample shows a trend of slight fluctuation. When frequency is 2.7 Hz, friction coefficient is the lowest. Tribological properties of PTFE/GCr15 contact surfaces could be significantly optimized by micro-textures and MoS2, which performs favorable prospect of engineering application such as guide rails, bearings, machinery seal, etc. |
Databáze: | OpenAIRE |
Externí odkaz: |