Impact of Die Geometry on Microhardness and Grain Size of Cold-Drawn Steel Wire

Autor:	Wojciech Z. Misiolek, Alexander R Bandar, John P. Coulter, R. B. Gifford
Rok vydání:	2004
Předmět:	Materials science business.product_category Heading (metalworking) Wire drawing Mechanical Engineering Metallurgy Conical surface Indentation hardness Industrial and Manufacturing Engineering Finite element method Grain size Transverse plane Mechanics of Materials Die (manufacturing) General Materials Science business
Zdroj:	Materials and Manufacturing Processes. 19:507-521
ISSN:	1532-2475 1042-6914
DOI:	10.1081/amp-120038658
Popis:	Two different heats of heading quality 302 stainless steel wire were drawn through three different conical die geometries. The microstructural response of the material was investigated via measurement of microhardness and grain size. The measurements across the transverse and longitudinal axes of the wires were then compared with strain measurements predicted through finite element modeling. Accuracy of the different measurements are compared, and an optimum “watch-dog” parameter for the verification of the modeling results is proposed.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::62e2db0643c02ccb2f59ff3c0bceeec2 https://doi.org/10.1081/amp-120038658 Zobrazit plný text záznamu Plný text ve formátu PDF Plný text ve formátu HTML
Nepřihlášeným uživatelům se plný text nezobrazuje	K zobrazení výsledku je třeba se přihlásit.