Evaluation of diffusion barrier and electrical properties of tantalum oxynitride thin films for silver metallization
| Autor: | Yu Wang, N. D. Theodore, E. Misra, Terry Alford |
|---|---|
| Rok vydání: | 2004 |
| Předmět: |
Materials science
Silicon Diffusion barrier Annealing (metallurgy) Metals and Alloys Tantalum Analytical chemistry chemistry.chemical_element Surfaces and Interfaces Rutherford backscattering spectrometry Surfaces Coatings and Films Electronic Optical and Magnetic Materials chemistry Materials Chemistry Electrical measurements Thin film Current density |
| Zdroj: | Thin Solid Films. 457:338-345 |
| ISSN: | 0040-6090 |
| Popis: | The thermal stability and the diffusion barrier properties of DC reactively sputtered tantalum oxynitride (Ta-O-N) thin films, between silver (Ag) and silicon (Si) p + n diodes were investigated. Both materials characterization (X-ray diffraction analysis, Rutherford backscattering spectrometry (RBS), Auger depth profiling) and electrical measurements (reverse-biased junction leakage current-density) were used to evaluate diffusion barrier properties of the thin films. The leakage current density of p + n diodes with the barrier (Ta-O-N) was approximately four orders of magnitude lower than those without barriers after a 30 min, 400 °C back contact anneal. The Ta-O-N barriers were stable up to 500 °C, 30 min anneals. However, this was not the case for the 600 °C anneal. RBS spectra and cross-sectional transmission electron microscopy of as-deposited and vacuum annealed samples of Ag/barrier (Ta-O-N)/Si indicate the absence of any interfacial interaction between the barrier and substrate (silicon). The failure of the Ta-O-N barriers has been attributed to thermally induced stresses, which cause the thin film to crack at elevated temperatures. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect