A controlled growth of WNx and WCx thin films prepared by atomic layer deposition
Autor: | Byeonghyeon Jang, Tae Eun Hong, Han-Bo-Ram Lee, Jun Beom Kim, Hyun-Jung Lee, Won Seok Han, Do-Joong Lee, Soo-Hyun Kim |
---|---|
Rok vydání: | 2016 |
Předmět: |
Materials science
Mechanical Engineering Inorganic chemistry Analytical chemistry chemistry.chemical_element 02 engineering and technology Tungsten 010402 general chemistry 021001 nanoscience & nanotechnology Condensed Matter Physics 01 natural sciences 0104 chemical sciences Carbide Amorphous solid chemistry.chemical_compound Atomic layer deposition chemistry Electron diffraction Mechanics of Materials Tungsten carbide General Materials Science Thin film 0210 nano-technology Tungsten nitride |
Zdroj: | Materials Letters. 168:218-222 |
ISSN: | 0167-577X |
Popis: | This work reports a capability for a controlled preparation of tungsten nitride and carbide thin films via an atomic layer deposition (ALD) approach. Those films were deposited by ALD using a fluorine- and nitrogen-free W metallorganic precursor of tungsten tris(3-hexyne) carbonyl [W(CO)(CH3CH2C≡CCH2CH3)] and a N2+H2 mixture plasma as a reactant at a deposition temperature of 250 °C. It was found that a phase, microstructure and composition of the films could be controlled in precision by varying a gas flow rate ratio of N2/H2 in the plasma reactant. With the N2/H2 gas ratio of 1:3 and 1:5, W-rich polycrystalline WNx thin films (W/N ratio:~1.39) were deposited with a resistivity of 700–900 µΩ cm, while nano-crystalline (close to an amorphous) W-rich WCx films (W/C ratio:~1.26) with a much lower resistivity of ~510 µΩ cm, without any nitrogen incorporation, were formed when H2 gas became extremely rich (N2/H2 gas ratio of 1:10). Both X-ray diffraction and electron diffraction analyses revealed that the ALD-WCx films were composed of hexagonal W2C, WC, and non-stoichiometric cubic β-WCx. while the ALD-WNx films of cubic W2N. |
Databáze: | OpenAIRE |
Externí odkaz: |