Type of contribution: Research article catalytic activity of sewage sludge char supported Re-Ni bimetallic catalyst toward cracking/reforming of biomass tar
Autor: | Navadol Laosiripojana, Apirat Laobuthee, Weerawan Laosiripojana, Pornlada Daorattanachai |
---|---|
Rok vydání: | 2018 |
Předmět: |
Methane reformer
Renewable Energy Sustainability and the Environment 020209 energy Tar Biomass 02 engineering and technology Catalysis chemistry.chemical_compound Cracking chemistry Chemical engineering 0202 electrical engineering electronic engineering information engineering Char Sludge Naphthalene |
Zdroj: | Renewable Energy. 121:644-651 |
ISSN: | 0960-1481 |
DOI: | 10.1016/j.renene.2018.01.096 |
Popis: | In the present work, catalytic activities of sewage sludge char supported Re-Ni bimetallic catalyst toward cracking/reforming of naphthalene and biomass tar were studied. Several proportions of Re and Ni (i.e. 1:9, 3:7, 5:5, 7:3 and 9:1) were investigated and their activities were compared to char, Ni/char and Re/char catalysts. Among all catalysts, the highest naphthalene cracking conversion and H2 yield were achieved from Re-Ni/char with Re:Ni ratio of 3:7. From the post-reaction characterizations, the additional of Re into Ni not only improves the dispersion of Ni on char surface by preventing agglomeration of particles but also improve the catalyst resistance toward carbon deposition. The additional of steam and O2 along with naphthalene as steam and autothermal reforming were also carried out. The presences of suitable steam and O2 can further promote H2 production and significantly reduce the degree of carbon formation. Under optimum conditions at 800 °C with H2O/C and O2/C molar ratios of 1.5 and 0.3, the catalyst exhibited high biomass tar conversion with only 5% deactivation in H2 yield after 18 h operation. Therefore, this study indicates the successful development of catalyst and process for biomass tar conversion via cracking and reforming processes. |
Databáze: | OpenAIRE |
Externí odkaz: |