Effect of B2O3 additive on the sintering temperature and microwave dielectric properties of Ba(Mg1/3Ta2/3)O3 ceramics
| Autor: | Sen Peng, Wenfei Zeng, Jiejia Tang, Yu Zhang, Chenglin Zhao |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
Materials science
Microwave dielectric properties Sintering Dielectric Abnormal grain growth Condensed Matter Physics Microstructure Atomic and Molecular Physics and Optics Electronic Optical and Magnetic Materials visual_art visual_art.visual_art_medium Ceramic Electrical and Electronic Engineering Composite material |
| Zdroj: | Journal of Materials Science: Materials in Electronics. 32:23309-23316 |
| ISSN: | 1573-482X 0957-4522 |
| DOI: | 10.1007/s10854-021-06815-4 |
| Popis: | This paper reported a research of the sinterability, microstructures, and microwave dielectric properties of Ba(Mg1/3Ta2/3)O3 (BMT) ceramics with different amounts of B2O3 additive. The results showed that B2O3 addition had an obvious effect on reducing the densification sintering temperature without detriment of the dielectric properties. Appropriate B2O3 addition could effectively lower the densification sintering temperature of BMT ceramics from 1650 to 1250 °C and achieved superior microwave dielectric properties. However, surplus B2O3 content addition caused abnormal grain growth and therefore deteriorated the densification and microwave dielectric properties of the BMT ceramics. Finally, BMT ceramics with 3 wt% B2O3 possessed superior microwave dielectric properties: er = 24.2, Q × f = 92,600 GHz (f = 8 GHz), and τf = 3.5 ppm/°C were achieved when sintered at 1250 °C. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink