| Autor: |
Yoo Myeong Han, Joon-Hyuk Song, Oh， Je-Ha, Min Seok Moon |
| Rok vydání: |
2019 |
| Předmět: |
|
| Zdroj: |
Journal of the Korean Society of Mechanical Technology. 21:976-981 |
| ISSN: |
1229-604X |
| DOI: |
10.17958/ksmt.21.5.201910.976 |
| Popis: |
Aluminum High Vacuum Die-casting process has become more prevalent in automotive manufacturing industry which require high productive rate, weldable process and heat treatment process. However, high pressure die castings usually contain gas porosity due mainly to the entrapment of air or gas in the die during the high speed injection of the molten metal into the die cavity. Vacuum block system with disk spring was developed and vacuum chanel was optimized with numerical flow analysis. The porosity of die castings was analyzed by X-ray CT, and the effect of porosity on the mechanical properties was analyzed by hardness and tensile test. Tensile strength was improved 49.5% for 50mbar high vacuum die-casting process compare then 300mbar. And then, Surface property was analyzed with plunger velocity and fast shot set point. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
