A study of the back stress and the friction stress behaviors of Ti-6Al-4V alloy during low cycle fatigue at room temperature
| Autor: | Linbo Mei, Duyi Ye, Haifeng Xu |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
Back stress
Cyclic stress Materials science Mechanical Engineering Alloy Metallurgy 02 engineering and technology engineering.material 021001 nanoscience & nanotechnology Condensed Matter Physics Cyclic deformation 020303 mechanical engineering & transports 0203 mechanical engineering Mechanics of Materials Hardening (metallurgy) engineering General Materials Science Low-cycle fatigue Ti 6al 4v Composite material 0210 nano-technology Softening |
| Zdroj: | Materials Science and Engineering: A. 700:530-539 |
| ISSN: | 0921-5093 |
| DOI: | 10.1016/j.msea.2017.06.051 |
| Popis: | Low cycle fatigue (LCF) tests were performed on Ti-6Al-4V alloy at room temperature. The fatigue hardening/softening of the Ti-alloy were determined. Both the back stress ( X ) and the friction stress ( σ F ) were evaluated from analysis of fatigue hysteresis loops and their cycle-dependent behaviors during fatigue tests were obtained experimentally. It is shown that the cyclic stress response or the fatigue hardening/softening of the Ti-alloy actually results from the competition effect of the back and the friction stress behaviors during fatigue cycling. A two-slope behavior in both the e pa -2 N f and the X -2 N f plots was also obtained. The micro-mechanisms associated with the back and friction stress behaviors as well as the two-slope behavior in the e pa -2 N f and X -2 N f plots were further discussed with the help of OM and TEM observations of fatigue failure specimens at representative strain amplitudes. In this study, the DIC technique was also introduced to characterize quantitatively the cyclic deformation heterogeneity of the Ti-alloy at the grain scale. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect