| Autor: |
Jun Jie Hao, Xian Zeng, Yong Liang Shi, Tao Lin, Zhi Meng Guo |
| Rok vydání: |
2012 |
| Předmět: |
|
| Zdroj: |
Advanced Materials Research. :933-937 |
| ISSN: |
1662-8985 |
| DOI: |
10.4028/www.scientific.net/amr.482-484.933 |
| Popis: |
Fe-Al2O3-TiC composite were fabricated by pressureless Ti-activated reactive melt infiltration. In this paper, a kind of Al2O3-Ti porous skeleton was prepared to be infiltrated with Fe-2Cr-3C alloy under vacuum. The microstructure and component analysis was investigated by scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). Subsequently, the wear testing was conducted to investigate the wear resistance of the Fe-Al2O3-TiC composites. The result show that the Fe-2Cr-3C alloy melt can full infiltrate the two kinds of Al2O3-Ti porous skeleton at 1390°C for 2 h. In the Fe-Al2O3-TiC composite, the coarse Al2O3 particles was surrounded by the TiC layer, which was generated by the Ti-C in-situ reaction in the infiltration process. The abrasive wear resistance of Fe-Al2O3-TiC composite is better than that of the wear resistant cast iron commonly used in industry. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
