Effectiveness of repairing old reinforced-concrete walls of the No. 8 lock of the Moscow Canal by prestressed anchors
Autor: | A. A. Lyubomirov, S. V. Ternavskii, V. N. Zhukov, Yu. O. Zal'tsman |
---|---|
Rok vydání: | 1996 |
Předmět: |
Engineering
business.industry Energy Engineering and Power Technology Anchoring Ocean Engineering Structural engineering Geotechnical Engineering and Engineering Geology Reinforced concrete General Energy Hydraulic structure Remaining life Deflection (engineering) Service life Forensic engineering business Water Science and Technology |
Zdroj: | Hydrotechnical Construction. 30:654-663 |
ISSN: | 1570-1468 0018-8220 |
DOI: | 10.1007/bf02447443 |
Popis: | 1. The special works performed on overhauling by the active anchoring method (with prestressed anchors) for strengthening the walls of the No. 8 lock of the Moscow Canal with strongly expressed signs of aging after 60 years of its intense operation increased the reliability of the walls and thereby increased the service life of the lock as a whole. In this case no interference to the passage of ships was created. 2. This method made it possible not only to stop the process of irreversible movements of the top of the walls toward the chambers but also provided deflection of the walls to the opposite side. The goal of the top-priority measures to strengthen the walls was thereby achieved, making it possible to proceed to measures of the second phase — repair of the front faces. 3. Compared with the passive anchoring method, prestressed anchors immediately enter into work, the uncertainty of the degree of remaining life after strengthening walls by them decreases, the anchors are more durable due to the anticorrosion sheath, and they provide quality control of the works by testing the strength of each anchor one by one, since the testing process is an element of the technology (“self-checking” technology). 4. The method is recommended for strengthening hydraulic structures in which cracks are opening and sustained movements of separated parts are observed. It is effective at different stages of development of destructive phenomena; it is useful as a prophylactic means of increasing reliability, strength, and stability. 5. The method is economical because the service life of the repaired structure is prolonged and it requires less metal than passive anchoring with comparatively smaller hole diameters. 6. The following promoted the successful use of the method when repairing the lock walls: high degree of development of the technology created by Gidroproekt and checked by it in new construction on the Hoa-binh, Sayano-Shushenskoe, and Rogun hydrostations; its correspondence to international rules established by the International Federation on Prestressed Reinforced Concrete; the specialized character of the construction organization (the Geotekhnika firm) that carried out these works with a high quality on the No. 8 lock with improvement of the technology and the quality control. 7. The method has ceased to be new. Its rather wide use during the past 10 years placed it in the ranks of the usual special works and well-mastered and reliable engineering means in construction. It is useful both in new construction and in reconstruction and repair of hydraulic structures as well as in other areas of construction. |
Databáze: | OpenAIRE |
Externí odkaz: |