Customizable Optical Pressure Sensor Based on Optimized Asymmetric Mach–Zehnder Interferometer: A Review
| Autor: | Jingyao Li, Qingjie Huang, Zisu Gong, Wei Ji, Rui Yin, Zerui Song |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
Materials science
Fabrication business.industry 010401 analytical chemistry Physics::Optics Mach–Zehnder interferometer Curvature 01 natural sciences Waveguide (optics) Pressure sensor Physics::Geophysics 0104 chemical sciences Radius of curvature (optics) Interferometry Optics Electrical and Electronic Engineering business Instrumentation Refractive index |
| Zdroj: | IEEE Sensors Journal. 20:8903-8911 |
| ISSN: | 2379-9153 1530-437X |
| DOI: | 10.1109/jsen.2020.2988774 |
| Popis: | In this paper, we verify the feasibility of our proposed design scheme for customizable optical pressure sensor based on the photo-elastic effect of SiO2 waveguide in asymmetric Mach-Zehnder interferometer (a-MZI) structure. The curve lengths and minimum radii of curvature of several common types of a-MZI arm curves are calculated theoretically. By analyzing the relationship between the radius of curvature of the long arm curve, the length of the long arm curve and the arm length difference of the a-MZI sensor under different types of arm curves, the design scheme for an a-MZI pressure sensor with a specific arm length difference is obtained. By selecting a rationalized arm design scheme, customization of the sensing range can be achieved. No special processing (such as etching) is required for the waveguide, which improves the pressure tolerance of the sensor. When using the SiO2 waveguide with a refractive index difference of 2%, the a-MZI pressure sensor based on sine type arm with arm length difference of 5 mm has a sensing range of 4.83 MPa and a sensitivity of 1.24 mW/MPa. The a-MZI pressure sensor with the ease of fabrication can be used to monitor various scenarios, such as marine and building monitoring. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|