Static Large-Area Hydrogenation of Polycrystalline Silicon Thin-Film Solar Cells on Glass Using a Linear Microwave Plasma Source
| Autor: | Armin G. Aberle, Per I. Widenborg, F. Law, Akash Kumar, H. Hidayat |
|---|---|
| Rok vydání: | 2012 |
| Předmět: |
Materials science
Hydrogen Silicon Analytical chemistry chemistry.chemical_element Substrate (electronics) Plasma engineering.material Condensed Matter Physics Ion source Electronic Optical and Magnetic Materials Wavelength Polycrystalline silicon chemistry engineering Electrical and Electronic Engineering Thin film |
| Zdroj: | IEEE Journal of Photovoltaics. 2:580-585 |
| ISSN: | 2156-3403 2156-3381 |
| DOI: | 10.1109/jphotov.2012.2202878 |
| Popis: | Hydrogenation of polycrystalline silicon thin-film solar cells on glass is performed to improve the open-circuit voltage Voc of the devices. The hydrogenation process is performed using linear microwave plasma sources that are capable of generating a uniform hydrogen-argon plasma over a large area. The substrate is fixed (i.e., does not move) during the hydrogenation process. The optical emission intensities from the hydrogen-argon plasma are recorded at two wavelengths using an optical emission spectroscopy system and are used to study the impact of several process parameters. The impact of these process parameters on the device's Voc is also studied. We demonstrate that this plasma reactor is able to hydrogenate samples with a size of up to 400 cm2. The uniformity of the hydrogenation process is evaluated by measuring the 1-sun Voc with a suns-Voc tester, giving voltage variations of less than ±3%. The highest average Voc achieved in this study is 465 mV on a 10 cm × 10 cm textured sample and 428 mV on a 20 cm × 20 cm textured sample. In addition, secondary ion mass spectroscopy is used to measure the hydrogen concentration in the poly-Si films, giving an average concentration of about 6 × 1019 cm-3. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|