| Autor: |
Holger Pätzold, Hendrik Rentzsch, Martin Schwarze, Carlo Rüger, Oliver Georgi |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Advances in Transdisciplinary Engineering |
| DOI: |
10.3233/atde210013 |
| Popis: |
Due to continuous tool engagement, turning processes tend to form long chips when machining ductile materials. These chip shapes have a negative influence on process performance and productivity. One approach to improve chip breakage is superimposition of vibrations in feed direction of the turning process, which leads to a modulation of uncut chip thickness. In a joint industrial project with Schaeffler Technologies AG & Co. KG, Fraunhofer IWU developed an oscillating actuator for turning. The actuator converts a rotational movement of a drive motor into a translational vibration via an eccentric gear. The tool shank is mounted in solid joint assemblies. With this prototypical system, a cyclic movement of the tool in feed direction can be realized. The typical operating parameters of the actuator is within the range of 1...100 Hz with adjustable vibration amplitudes up to 0.6 mm peak-to-peak. A significant improvement in chip breaking during the machining of steel 1.0503 was shown in cutting tests. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
