Surface tension of molten stainless steels under plasma conditions

Autor:	Taihei Matsumoto, T. Misono, Hidetoshi Fujii, Kiyoshi Nogi
Rok vydání:	2005
Předmět:	Surface tension Materials science Sessile drop technique Mechanics of Materials Mechanical Engineering Metallurgy Analytical chemistry Sulfur content General Materials Science Plasma Atmospheric temperature range Temperature coefficient
Zdroj:	Journal of Materials Science. 40:2197-2200
ISSN:	1573-4803 0022-2461
DOI:	10.1007/s10853-005-1932-9
Popis:	The surface tension and the density of 304 stainless steels with the sulfur contents of 10, 100 and 250 ppm were measured under low pressure Ar plasma conditions in the temperature range of 1823–2073 K. The measurements were carried out by the sessile drop method and a (La0.9Ca0.1)CrO3 substrate was used. No significant influence of the plasma was observed on the surface tension and its temperature coefficient. The surface tension and density of 304 stainless steel are expressed using the following equations: $$ \displaylines{ \gamma = - 0.12\times T + 1980 \ ({\rm mN/m}) \quad (10 \,{\rm ppm\, Sulfur})\cr \gamma = 0.29\times T + 1030 \ ({\rm mN/m})\quad (110 \,{\rm ppm \,Sulfur})\cr \gamma = 0.49\times T + 520\ ({\rm mN/m})\quad (250 \,{\rm ppm \,Sulfur})\cr \rho = - 0.616\times T + 8.11\times 10^{+3 } \ ({\rm kg/m^{3}})\cr} $$
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::038c09fb454f3ba341465bfbc52158f1 https://doi.org/10.1007/s10853-005-1932-9 Zobrazit plný text záznamu Plný text ve formátu PDF