Experimental comparison of absorber and conductive floor automotive near field antenna measurement systems
| Autor: | L. J. Foged, J. Estrada, A. Scannavini, Francesco Saccardi, J.A. Graham, P. O. Iversen, F. Mioc, M. Edgerton |
|---|---|
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | International Journal of Microwave and Wireless Technologies. 14:689-700 |
| ISSN: | 1759-0795 1759-0787 |
| Popis: | Large truncated spherical near-field systems with conductive or absorbing floors are typically used in the measurement of the performances of vehicle-installed antennas. The main advantage of conductive floor systems is the ease of accommodation of the vehicle under test, but their performances are affected by the interaction with the reflecting ground floor. Instead, absorbing-based systems emulating free-space conditions minimize the effect of the interaction with the floor, but generally require longer setup times, especially at lower frequencies (70–400 MHz), where bulky absorbers are typically used to improve reflectivity levels. Considering scaled measurements of a vehicle model, the performances of these two typical implementations are analyzed in the 84–1500 MHz range and compared to free-space measurements. Absorbers with different dimensions and reflectivity have been installed in the scaled measurement setup, and measured data have been investigated with proper post-processing to verify the applicability to realistic systems. Figures of merit of interest for automotive applications, like gain and partial radiated powers, have been compared to free-space to evaluate the impact of different scenarios. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|