H ∞ Filtering Design for Driver Torque Estimation in Electric Power Steering System
| Autor: | Yamamoto, Kazusa, Moulaire, Pascal, Koenig, Damien, Sename, Olivier |
|---|---|
| Přispěvatelé: | JTEKT (JTEKT), GIPSA - Systèmes linéaires et robustesse (GIPSA-SLR), Département Automatique (GIPSA-DA), Grenoble Images Parole Signal Automatique (GIPSA-lab ), Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Institut Polytechnique de Grenoble - Grenoble Institute of Technology-Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes [2016-2019] (UGA [2016-2019])-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Institut Polytechnique de Grenoble - Grenoble Institute of Technology-Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes [2016-2019] (UGA [2016-2019])-Grenoble Images Parole Signal Automatique (GIPSA-lab ), Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Institut Polytechnique de Grenoble - Grenoble Institute of Technology-Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes [2016-2019] (UGA [2016-2019])-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Institut Polytechnique de Grenoble - Grenoble Institute of Technology-Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes [2016-2019] (UGA [2016-2019]), Yamamoto, Kazusa |
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: | |
| Zdroj: | Proceedings of the13th International Symposium on Advanced Vehicle Control AVEC 2016-13th International Symposium on Advanced Vehicle Control AVEC 2016-13th International Symposium on Advanced Vehicle Control, Sep 2016, Munich, Germany |
| Popis: | International audience; This paper describes a method to estimate the driver torque in an Electric Power Steering (EPS) system without taking into account the torque sensor signal. First, a pinion-type EPS model is expressed by Newton's law of motion considering the effort transmitted from the road as an unknown input. Then, the design of a H ∞ filter is proposed to estimate the driver torque. The formulation aims at minimizing the estimation error in the presence of the external force induced by the road sollicitations and sensor noises. The efficiency of this H ∞ filter is assessed through simulation results using input data gathered from experimental tests on a real car. Furthermore these results are compared with torque measurements obtained on the experimental car for validation purpose only. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|