Design, construction, and NDT of a mock-up for reinforced concrete walls in NPP

Autor: Al-Neshawy, Fahim, Ferreira, Rui Miguel, Bohner, Edgar, Ojala, Teemu, Sjöblom, Ville, Niederleithinger, Ernst, Effner, Ute, Puttonen, Jari
Jazyk: angličtina
Rok vydání: 2019
Předmět:
Zdroj: Al-Neshawy, F, Ferreira, R M, Bohner, E, Ojala, T, Sjöblom, V, Niederleithinger, E, Effner, U & Puttonen, J 2019, Design, construction, and NDT of a mock-up for reinforced concrete walls in NPP . in SMiRT 25, August 4-9, 2019, Charlotte, NC, USA : Division IX . International Association for Structural Mechanics in Reactor Technology IASMiRT, 25th International Conference on Structural Mechanics in Reactor Technology, SMiRT 25, Charlotte, North Carolina, United States, 4/08/19 .
Popis: Construction methods, environmental stressors, and aging factors are the main causes for defects of reinforced concrete in nuclear power plants (NPP). These defects are typically occurred as corrosion of reinforcement steel, delamination, cracks, malfunction of post-tensioning or steel composite systems etc. Some of the challenges for assessing the performance of these structures by nondestructive testing methods (NDT) are that the assessment could be performed only during the annual overhauls when testing is time-limited and uncertainty of the accuracy and reliability of the available NDT testing devices combined with the lack of the international uniformity of the methods used for NDT tests.To overcome these challenges, a mock-up wall representing a section of the concrete containment of the NPP. The mock-up wall included simulated defects, which mimic the most common types of defects in NPP concrete structures such as dimensional errors, honeycombing, delamination, defects adjacent to the steel liner and voids in grouted tendon ducts for the posttensionedstructures. This paper introduce the design and construction of the wall including the concrete properties, reinforcement, tendon ducts and the types of the simulated defects. The paper also introduces the NDT methods and techniques that are suitable for assessing the condition of the mock-up wall under the real environmental conditions. These techniques include mechanicalmethods as rebound hammer, ultrasonic and electromagnetic methods. This mock-up wall will enable to investigate reliably available NDT methods and experts’ skills providing also an important and very much need educational platform for future NDE experts.
Databáze: OpenAIRE