| Autor: |
Cerlincă, Delia-Aurora, Tamașag, Ioan, Beșliu-Băncescu, Irina, Severin, Traian-Lucian, Dulucheanu, Constantin |
| Předmět: |
|
| Zdroj: |
International Journal of Advanced Manufacturing Technology; Nov2024, Vol. 135 Issue 3/4, p1449-1463, 15p |
| Abstrakt: |
Continuous research in the field of metal additive manufacturing has led to the need for constant improvement of manufacturing parameters especially in the case of FDM (Fused Deposition Modeling) manufacturing. In recent years, the main directions outlined for productivity and quality improvement were related to higher printing speed and the use of ironing-type processes. This article aims to study the manufacturing parameters of the dimensional accuracy and surface quality of FDM-manufactured 316L stainless steel. The degree of novelty is given by the application of the ironing process for the green part. A full factorial 33 experimental design was designed for this study, in which the factors studied were ironing angle, ironing speed, and layer spacing during ironing. The dimensional accuracy and surface roughness were analyzed by means of deviation measurement from CAD to the green part and final part after the sintering process. Using the design of experiments offers the possibility of applying the analysis of variance (ANOVA) which provides information about the degree of influence of each of the studied factors. The results obtained for the dimensional accuracy showed that the ironing direction had the biggest influence on the Z-axis shrinkage. Overall, approximately 6% shrinkage in the Z and Y directions was obtained while in the X directions, the shrinkage percentage was around 20%. Surface roughness showed an improvement with higher ironing speeds for the green part while for the sintered part the most significant factor was ironing spacing. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink