| Abstrakt: |
Although liquefaction technology has been extensively applied, plenty of biomass remains tainted with heavy metals (HMs). A meta-analysis of literature published from 2010 to 2023 was conducted to investigate the effects of liquefaction conditions and biomass characteristics on the remaining ratio and chemical speciation of HMs in biochar, aiming to achieve harmless treatment of biomass contaminated with HMs. The results showed that a liquefaction time of 1–3 h led to the largest HMs remaining ratio in biochar, with the mean ranging from 84.09% to 92.76%, compared with liquefaction times of less than 1 h and more than 3 h. Organic and acidic solvents liquefied biochar exhibited the greatest and lowest HMs remaining ratio. The effect of liquefaction temperature on HMs remaining ratio was not significant. The C, H, O, volatile matter, and fixed carbon contents of biomass were negatively correlated with the HMs remaining ratio, and N, S, and ash were positively correlated. In addition, liquefaction significantly transformed the HMs in biochar from bioavailable fractions (F1 and F2) to stable fractions (F3) (P < 0.05) when the temperature was increased to 280–330 ℃, with a liquefaction time of 1–3 h, and organic solvent as the liquefaction solvent. N and ash in biomass were positively correlated with the residue state (F4) of HMs in biochar and negatively correlated with F1 or F2, while H, O, fixed carbon, and volatile matter were negatively correlated with F4 but positively correlated with F3. Machine learning results showed that the contribution of biomass characteristics to HMs remaining ratio was higher than that of liquefaction factor. The most prominent contribution to the chemical speciation changes of HMs was the characteristics of HMs themselves, followed by ash content in biomass, liquefaction time, and C content. The findings of this meta-analysis contribute to factor selection, modification, and application of liquefied biomass to reducing risks. [ABSTRACT FROM AUTHOR] |
