| Autor: |
Xie, Taotao, Zhang, Jiawei, Xiao, Dawei, Ji, Qing |
| Předmět: |
|
| Zdroj: |
Applied Sciences (2076-3417); Jun2024, Vol. 14 Issue 11, p4800, 18p |
| Abstrakt: |
A wave glider is an ocean observation platform that utilizes wave energy to drive and solar energy to power. Its metal structure will generate related electromagnetic fields due to corrosion and underwater motion. In the detection of weak electromagnetic field signals underwater, its own electromagnetic field characteristics will have an impact on signal detection. To study the applicability of electric field sensors and magnetic field sensors on wave glider platforms, the structural characteristics of the wave glider were analyzed, and the installation positions of electric field sensors and magnetic field sensors were designed based on the different motion states of the water surface mother body and underwater towing body. The measured electromagnetic field data of the wave glider platform were measured, and the measured data were analyzed. It was determined that the interference electric field energy under typical working conditions of the wave glider was mainly concentrated within 1 Hz, which decreased with increasing frequency, and the magnitude was mV/m. The magnitude of the interference magnetic field is several tens of nT, indicating that the electromagnetic field interference is significant during the working state of the wave glider. Installing an electric field sensor directly at the bottom of the wave glider will cause significant noise interference, while installing the magnetic field sensor directly at the bottom of the tractor will affect the servo and the shaking-induced magnetic field. Moreover, wave gliders should not use electric field signals below 1 Hz as signal sources, but they can utilize axial frequency electromagnetic fields to detect weak electromagnetic signals underwater. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
