| Autor: |
Xue, Huishi, Song, Yanhui, Feng, Man, Ju, Guanghong |
| Předmět: |
|
| Zdroj: |
Applied Sciences (2076-3417); May2024, Vol. 14 Issue 9, p3736, 12p |
| Abstrakt: |
The rock mass deformation modulus is one of the most important design parameters in a range of rock engineering applications. Its value is usually obtained directly through in situ testing or estimated indirectly on the basis of a rock mass quality classification system. Because in situ testing is generally costly, time-consuming, and presents operational difficulties, it cannot be carried out extensively, and many researchers have concentrated on developing indirect procedures to obtain information on the modulus of deformation, such as the RMR method, Q method, and GSI method. The purpose of this paper is to present a new system for estimating the rock mass deformation modulus called the BQ method, which is based on the BQ (basic quality) system. In this paper, the BQ system is first briefly reviewed, and then more than 60 in situ measurements from three large hydropower stations in China are used to develop a new relationship between BQ and the deformation modulus, based on a power function relationship. The paper also derives correlations based on the existing estimation formula and the relationship between BQ and other classification schemes, resulting in several recommended formulas for estimating the deformation modulus of a rock mass using the BQ method. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
