| Abstrakt: |
This paper presents the nickel–cobalt nanoprickly particles (PNi2Co3) composited with graphene nanosheets (GNs) and carbon nanotubes (CNT), prepared via the one-pot hydrothermal method (PNi2Co3/GNs/CNT), as an efficacious nonprecious metal bifunctional electrocatalyst for both oxygen evolution and reduction reactions (OER/ORR). The study employs a comprehensive methodology, incorporating cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and Brunauer–Emmett–Teller (BET) analysis to characterize and assess the materials and electrochemical properties investigated in the article. The primary objective was to successfully prepare a bifunctional electrocatalyst, and the PNi2Co3/GNs/CNT material achieved this goal. It exhibited superior OER activity, durability, and resistance to crossover effects, by an overpotential (η) of 480 mV and a Tafel slope of 61 mV dec−1, significantly higher than those obtained for RuO2 nanoparticles (η = 970 mV, Tafel slope = 85 mV dec−1). A similar trend was observed for ORR, where the PNi2Co3/GNs/CNT displayed high activity with an n = 3.93, close to the activity of a Pt/C (20 wt%), commercial catalyst with n = 4. Careful analysis of the EIS results via suitable models, in conjunction with Tafel data, revealed that the enhanced activity originates mainly from two factors: (a) the large surface area of the Ni–Co nanoprickly alloy and graphene sheets, where the CNTs (as a spacer) helped graphene nanosheets to avoid restacking and decreasing the surface area, and (b) the synergistic effect between Ni–Co nanoprickly and carbon components (GNs and CNT) of the composite. [ABSTRACT FROM AUTHOR] |
Full text from SpringerLink