Determination of the height reference surface for the Republic of Albania by using global geopotential models.

Autor: Bajrami Lubishtani, Fitore, Idrizi, Bashkim, Lubishtani, Milot
Předmět:
Zdroj: Journal of Applied Geodesy; Jul2023, Vol. 17 Issue 3, p285-294, 10p
Abstrakt: For the development of various geodetic tasks within a state, determining the Height Reference Surface by the geoid model is extremely important. Considering this, one of the main task of geodesy is to determine the geoid, which is defined as an equipotential surface of the Earth's gravity field, as a result, it corresponds on average to the sea level. The aim of this study is to analyze the best-fitting geoid model for the territory of the Republic of Albania. In this study, DFHRS (Digital Finite Element Height Reference Surface) method was used (www.dfhbf.de), developed by Reiner Jäger [Jäger R. State of the art and present developments of a general approach for GPS-based height determination. East Africa: University of Applied Sciences, Faculty Geoinformationswesen, Department of Surveying and Geomatics. Paper Presented at the First Workshop on GPS and Mathematical Geodesy in Tanzania (Kilimanjaro Expedition 1999); 1999] to determine the most suitable geoid model for the territory of Albania. This approach allows the conversion of ellipsoidal heights determined by GNSS into the standard heights, which refer to the height reference surface (HRS) of an orthometric. The DFHRS is defined as continuous HRS in arbitrarily large areas by bivariate polynomials over an irregular grid [Jäger R, Schneid S. Online and postprocessed GPS heighting based on the concept of a digital height reference surface (DFHRS), in vertical reference systems. In: IAG Symposium. Cartagena, Colombia, Heidelberg: Springer; 2001, vol 124:203–8 pp]. The DFHRS approach uses a wide range of input data (Geometric and Physical) and in our case, there were 151 GPS/levelling height data as well as physical derivatives from different global geopotential models. The main focus of this study is placed on the calculation of the most suitable geoid model for the territory of Albania using global geopotential models (EGM96, EGM2008, EIGEN04, EIGEN6C4 and European Gravimetric Geoid Model 1997 (EGG97)). After analyzing the results and comparing the models among themselves, the Albanian DFHRS-EIGEN6C4 model was selected as the most suitable model for the territory of Albania. [ABSTRACT FROM AUTHOR]
Databáze: Complementary Index