| Autor: |
Esteves, David Seixas, Durães, Nelson, Pedroso, Rúben, Melo, Amanda, Paiva, Maria C., Sequeiros, Elsa W. |
| Předmět: |
|
| Zdroj: |
Applied Sciences (2076-3417); Feb2023, Vol. 13 Issue 3, p1437, 17p |
| Abstrakt: |
Soft robotics is an expanding area with multiple applications; however, building low-cost, soft, and flexible robots requires the development of sensors that can be directly integrated into the soft robotics fabrication process. Thus, the motivation for this work was the design of a low-cost fabrication process of flexible sensors that can detect touch and deformation. The fabrication process proposed uses a flexible polymer nanocomposite with permanent magnets strategically placed where the conductive electrodes should be. The nanocomposite is based on poly(dimethylsiloxane) (PDMS) and multi-walled carbon nanotubes (MWCNTs). The MWCNT contains ferromagnetic impurities remaining from the synthesis process, which can be used for magnetic manipulation. Several electrode geometries were successfully simulated and tested. The magnetic patterning was simulated, allowing the fabrication of conductive patterns within the composite. This fabrication process allowed the reduction of the electrical resistivity of the nanocomposites as compared to the composites with homogeneous MWCNT dispersion. It also allowed the fabrication of piezoresistive and triboelectric sensors at MWCNT concentration as low as 0.5 wt.%. The fabrication process proposed is flexible, allows the development of sensors for soft robotics, as well as monitoring large and unconventional areas, and may be adapted to different mould shapes and polymers at low cost. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
