| Autor: |
MARCHENKO, A. E., GNATENKO, M. F., SKORINA, N. V. |
| Předmět: |
|
| Zdroj: |
Paton Welding Journal; 2019, Issue 12, p48-55, 8p |
| Abstrakt: |
The method of oscillographing the signals generated by electromagnetic sensor, through the channel of which the electrodes pass at the outlet of the press coating head, was used to study the effect of extrusion modifiers of the coating mixture on thickness difference in manufacture of test electrodes UONI 13/55 of 4 mm diameter. The phenomenon of reduction of coating thickness difference under the effect of modifiers (CMC, alginates, cellulose or soda ash) is explained by that the dose of liquid glass added to the mixture gradually increases with the change of the type and increase of the content of modifier. Hydrating of modifying additive particles as a result of absorption of liquid glass moisture leads to thickening of the glass, and of its intergranular layers in the coating mixture, and to weakening of Hamaker interaction of filler grains. Probability of generation and accumulation of elastic stresses during extrusion application of the mixture on the rods becomes lower. The ability of the coating mixture flow to cover the rods in a uniform concentric layer at crimping of the electrodes becomes higher, accordingly. 6 Ref., 1 Table, 11 Figures. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
